Easy Link’s 10Gigabit 28AWG Bare Copper Unshielded(UTP)Cat6a Ultra Thin Patch Cable is a great solution for high-density data center cabinets, as well as in limited spaces that need cabling. Also, it allows PoE by using 28awg wires, and it realized to make the cable diameter as small as 3.8mm; crossover design minimizes Near-End Crosstalk (NEXT) levels and interference from the electromagnetic field, and successfully passes Cat6a Fluke Chanel Test. Allows to support 500MHz bandwidth networking, and works with the cable modem, DSL modem, router, hub, patch panel, or other network-enabled devices.

Physical Characteristics

• Cable Type – Cat6A UTP
• Connector Type(s) – RJ45 Male
• Wiring Scheme – T568A or T568B
• Temperature Rating – -20°C to +75°C
• Voltage Rating – 30V

———————————————————————————————————————————————

Conductor (Qty. 4 twisted pair)

• Conductor Type – 28AWG(7/0.12), Bare Copper
• Insulation – HDPE
• Dimeter – 0.80±0.05mm
• Pair Identification:
• Pair1=Orange, Orange-White
• Pair2=Blue, Blue-White
• Pair3=Green, Green-White
• Pair4=Brown, Brown-White

Connector Type (Qty. 2)

• Connector Type – Unshielded 8P8C (RJ45)
• Gender – Male
• Connector Material – PC
• Contact Material – Copper Alloy, Gold Plating – 50µm
• Hood Material – Molded PVC

Overall Cable 

• Jacket – PVC/LSZH/TPE
• Minimum Average Thickness – 0.30mm
• Outer Diameter – 3.8 ± 0.15mm

———————————————————————————————————————————————

Electrical Characteristics

• Conductor DC Resistance – 22.7Ω/100m (maximum)
• Impedance – 100Ω
• Capacitance – 5600pf/100m
• Propagation Delay – 545ns/100m (maximum)
• Delay Skew – 45ns/100m (maximum)

———————————————————————————————————————————————

Product Application

• Horizontal networks installation
• 10Gigabit; Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)
• Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels etc.