1U Cat6A Shielded STP 48 Ports Inline Coupler Patch Panel

1U Cat6A Shielded STP 48 Ports Inline Coupler Patch Panel

10G Support 19″ 1U48 Port Cat6A Shielded STP Patch Panel loaded with Inline Keystone 

Coupler Patch Panel STP Shielded 19-Inch with Removable Back Bar, 1U Network Patch Panel for Cat7, Cat6, Cat6A, Cat5e, Cat5 Cabling

Connector Type RJ45
Cable Type HDMI, VGA, Ethernet
Connector Gender Female-to-Female
Unit Count 1 Count

Patch Panel 48 Port Cat6A with Inline Coupler Built for Easy Use, Excellent Speed, and Reliable Connectivity

Easy Link ethernet patch panel support excellent performance transmission up to10-Gigabit, compatible with the TIA/EIA 568-C.2 standard and cat7, cat6a, cat6, cat5e, cat5e UTP, and STP cabling system.

Standard 19-inch 1u patch panel suitable for Rackmount, Wallmount, or cabinets.

This Cat6A with a thick steel detachable back bar. With zip ties, the back bar helps with cable management and takes some stress off the coupler, improves the working stability of the network connection port, and avoids keystone loose and the occurrence of network failures.

Cat6A patch panel came with 10g couplers making it easier to connect the cables.

Use this to replace a punch-down patch panel.

Plug and play on both sides for ethernet cables.

This 19-rack blank panel is less prone to failure as well.

CAT6A passthrough coupler tested full 10 gigabytes certified.

Clean up the look of your cabinet or wall mount in 10 minutes.

Inline modular patch panel much better than punching down Keystones

These cat6A shielded patch panel were easy to install and use. Pass through design is more friendly to non-professional persons since it is use terminated cables and is plugged directly into switches.

Coupler patch panel lets you don’t have to spend time wiring Cat5/6 in order to get your system up and running.

Just several steps are needed as follows:

1. Plug all network cables into the back of the keystone loaded on shielded patch panel cat6a.

2. Assembly detachable back bar into the patch panel

3. Fasten the network cable onto the back bar to the sturdy cable and back bar. This step is very important to secure the keystone, cable, and back bar.

4. Put the whole patch panel onto a standard 19-inch wall mount and screw the screw included.

4. Put the whole patch panel onto a standard 19-inch wall mount and screw the screw included.

Shielded High Density Patch Panel, 1U 48-Port Blank Patch Panel

Shielded High Density Patch Panel, 1U 48-Port Blank Patch Panel

19″ 1U RJ45 Cat.6A Cat.6 STP FTP Shielded Blank Unloaded  Patch Panel

This easy-to-install High-Density Patch Panel is perfect for larger network solutions. Get up to 48 different ethernet connections with this 48-Port patch panel. Easily snap in the keystone jacks of your choice. Great for combining with slim-designed connectivity for extra room and performance. Mount on to the wall of your home or install in a network enclosure. This horizontal patch panel is versatile for many different applications. 

Features

  • High-density solution for up to 48 connectors
  • Shielded for protection from EMI
  • Set up in your home or business network
  • Compatible with Cat6, Cat6A, and Cat8 keystone jacks
  • Stackable patch panel with 1U

 

Type Patch Panel
Ports 48
Color Steel
Port Type Fits Cat6, Cat6A, Cat8
Length 19 Inches
Model Blank
Contact Compatibility -10°C to 60°C
Storage temperature range -40°C to 68°C
Humidity 10%~90%RH

 

Q:  Will Cat6 jacks fit alongside each other?

A:  Cat6 keystone jacks whether 90° or 180° will fit along side each other in the 48 ports

Q:  Can you use this shielded patch panel with unshielded keystone jacks?

A:  Absolutely! This shielded 48 port patch panel is perfect to use with shielded or unshielded keystone jacks. If your cable is shielded you want to use shielded jacks and if your cable is unshielded you want to use unshielded connectors.

Q:  Can this fit Cat8 keystone jacks?

A:  Yes, this patch panel is compatible with our Cat8 jacks

Half U High Density blank Patch Panel 24 ports for UTP keystone jacks

Half U High Density blank Patch Panel 24 ports for UTP keystone jacks

 0.5U-24P SNAP-IN Unloaded Empty Patch Panel

  • Suitable for a number of outlets/modules: 24
  • Shielded: no
  • Category: Keystone jack dependent
  • House Material: Cold-rolled Steel with Nickel Plating
  • Number of rack units (RU): 0.5
  • Colour: Silver or customized 
  • Height: 22 mm
  • Port Type: AMP Style

     

    Easy Link’s 0.5U 24-Port Unshielded Keystone jack snap-in type patch panel complements keystone jacks and offers a flexible patching solution. This modular capability allows the custom configuration of panels to suit a variety of applications. Low-cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises.

    Product name
    Half U 24-port unshielded empty patch panel
    House material
    Cold-rolled steel with nickel plating
    Port type
    AMP style
    Type
    UTP
    Product size
    482.5x22x103mm
    Gender
    Female
    Packing information
    Each one in an individual box, 10pcs per carton, carton size: 52x27x19cm, G.W.: 6kg.

     

     

     

     

    1) Do Away With The Clutter- Create a cleaner cable environment with this keystone panel. Aside from being visually appealing, it can also result in a more effective and efficient cable management system.
    2) Accommodate Multiple Keystone Types – This 24-port patch panel is compatible with different kinds of standard keystone jacks for audio, video, and data. These include CAT5e, CAT6, CAT6A, USB, and HDMI.
    3) Convenient Cable Management Unit – The unloaded patch panel sports a snap-IN design for easier installation. No need to take the network rack apart whenever you need to make adjustments or modifications.
    4) Easier Cable Identification – The removable writing board with bold numbering enables quick identification of cables. The adjustable rear cable management bar can accommodate various wire diameters.
    5) Easy To Install – This network patch panel takes up 1U of space and is designed to fit 19″ racks, brackets, cabinets, and other enclosures. All mounting hardware needed for installation is included.

    0.5U High Density blank Patch Panel 24 ports for keystone jacks

    0.5U High Density blank Patch Panel 24 ports for keystone jacks

    Half U 24-Port Unshielded Empty Patch Panel

    • Suitable for a number of outlets/modules: 24
    • Shielded: no
    • Category: Keystone jack dependent
    • House Material: Cold-rolled Steel with Nickel Plating
    • Number of rack units (RU): 0.5
    • Colour: Black or customized 
    • Height: 22 mm
    • Port Type: AMP Style

       

      Easy Link’s 0.5U 24-Port Unshielded Keystone jack snap-in type patch panel complements keystone jacks and offers a flexible patching solution. This modular capability allows the custom configuration of panels to suit a variety of applications. Low-cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises.

      Product name
      Half U 24-port unshielded empty patch panel
      House material
      Cold-rolled steel with nickel plating
      Port type
      AMP style
      Type
      UTP
      Product size
      482.5x22x103mm
      Gender
      Female
      Packing information
      Each one in an individual box, 10pcs per carton, carton size: 52x27x19cm, G.W.: 6kg.

       

       

       

       

      1) Do Away With The Clutter- Create a cleaner cable environment with this keystone panel. Aside from being visually appealing, it can also result in a more effective and efficient cable management system.
      2) Accommodate Multiple Keystone Types – This 24-port patch panel is compatible with different kinds of standard keystone jacks for audio, video, and data. These include CAT5e, CAT6, CAT6A, USB, and HDMI.
      3) Convenient Cable Management Unit – The unloaded patch panel sports a snap-IN design for easier installation. No need to take the network rack apart whenever you need to make adjustments or modifications.
      4) Easier Cable Identification – The removable writing board with bold numbering enables quick identification of cables. The adjustable rear cable management bar can accommodate various wire diameters.
      5) Easy To Install – This network patch panel takes up 1U of space and is designed to fit 19″ racks, brackets, cabinets, and other enclosures. All mounting hardware needed for installation is included.