Cat 7 SFTP  Pre-Terminated Copper Trunk Cable

Cat 7 SFTP  Pre-Terminated Copper Trunk Cable

Cat7  SFP  Jack to Jack Pre-Terminated Copper Trunk Assemblies Manufacturer

  • Type: Cat5e/Cat6/Cat6A/Cat7/Cat8
  • Conductor: Stranded 24/26/28AWG
  • Type:Jack to Jack
  • Lengths: 0.2m/0.3m/0.5m/1m/1.5m/2m/3m…30m
  • Colors: Blue/grey/black/green/yellow/red/white…
  • Package: 1pcs/PE bag
  • Approvals: CE, RoHS&REACH
  • Warranty: Lifetime

 

Cat7 SFP Pre-terminated Copper Ethernet Trunk Cable  Jack  to Jack 

CAT6A 12 * Jack-to-Plug Pre-terminated Copper Ethernet Trunk Cable

 Cable Type
CAT8/CAT7/CAT6A/CAT6/CAT5E
Conductor material
oxygen-free copper
Facing material
PVC/LSZH
AWG
26AWG strand wire
Data transfer rate
1000Mbps
Transmission frequencies
500MHz
Test limited
Fluke DSX-8000 Channel Link Test
length
0.5m~40m/OEM
Operating temperature
-20℃~+60℃
Bending radius
4 times cable diameter

 

CAT6A 12 * Jack-to-Plug Pre-terminated Copper Ethernet Trunk Cable
1,Up to 75% time saved on site and labor costs.
2, Factory-terminated and pre-tested cabling to allow simple plug-play installation.
3, Termination End: Plug-to-Plug; Plug-to-Jack; Jack-to-Jack; Jack-to-Open; Plug-to-Open
4, Terminated ends offered in either “staggered” or “even” cut.
5, Cable count: 6 cables; 12 cables; 24 cables; or customized
6, Available in CAT.8, Cat.7A, Cat.7, Cat.6A, Cat.6 & Cat.5e
7, Premium packing available 8, Choose from 9 colors.

 

CAT6A 12 * Jack-to-Plug Pre-terminated Copper Ethernet Trunk Cable

Applications in the Data Center
Pre-terminated trunking cable assemblies can be used for copper cross-connect and copper backbone between ethernet switches and enterprise servers.

Product Paramenters
Product Display
 
 

CAT6A 12 * Jack-to-Plug Pre-terminated Copper Ethernet Trunk Cable

CAT6A 12 * Jack-to-Plug Pre-terminated Copper Ethernet Trunk Cable

Pre-Terminated Copper Trunk Assemblies Manufacturer

  • Type: Cat5e/Cat6/Cat6A/Cat7/Cat8
  • Conductor: Stranded 24/26/28AWG
  • Type:Jack to Plug
  • Lengths: 0.2m/0.3m/0.5m/1m/1.5m/2m/3m…30m
  • Colors: Blue/grey/black/green/yellow/red/white…
  • Package: 1pcs/PE bag
  • Approvals: CE, RoHS&REACH
  • Warranty: Lifetime

 

Pre-terminated Copper Ethernet Trunk Cable  Jack  to Plug

CAT6A 12 * Jack-to-Plug Pre-terminated Copper Ethernet Trunk Cable

 CAT.6A Pre-Terminated trunking cable, supporting 10Gbs 500 MHz. 12 jack to 12 plug modules on both ends of assembly for simple plug and play installation.
Typically used for in-cabinet or cabinet-to-cabinet equipment cord harnesses, the jack-to-plug type is installed into the patch panels on one end and switch ports on the other end for switch port replication applications, eliminating one cross-connect point by having the cable plugged directly into the active equipment.

 

CAT6A 12 * Jack-to-Plug Pre-terminated Copper Ethernet Trunk Cable
1,Up to 75% time saved on site and labor costs.
2, Factory-terminated and pre-tested cabling to allow simple plug-play installation.
3, Termination End: Plug-to-Plug; Plug-to-Jack; Jack-to-Jack; Jack-to-Open; Plug-to-Open
4, Terminated ends offered in either “staggered” or “even” cut.
5, Cable count: 6 cables; 12 cables; 24 cables; or customized
6, Available in CAT.8, Cat.7A, Cat.7, Cat.6A, Cat.6 & Cat.5e
7, Premium packing available 8, Choose from 9 colors.

 

CAT6A 12 * Jack-to-Plug Pre-terminated Copper Ethernet Trunk Cable

 Applications in the Data Center
Pre-terminated trunking cable assemblies can be used for copper cross-connect and copper backbone between ethernet switches and enterprise servers.

Product Display

Cat6a 10G Pre-Terminated Copper Trunk Assembly

Cat6a 10G Pre-Terminated Copper Trunk Assembly

Pre-Terminated Copper Trunk Cables manufacturer

  • Type: Cat6/Cat6A/Cat7
  • Conductor: Stranded 24/26/28AWG
  • Lengths: 0.2m/0.3m/0.5m/1m/1.5m/2m/3m…30m
  • Colors: Blue/grey/black/green/yellow/red/white…
  • Package: 1pcs/PE bag
  • Approvals: CE, RoHS&REACH
  • Warranty: Lifetime

 

Pre-terminated Copper Ethernet Trunk Cable  Jack  to Jack 

Easy Link Copper Pre-Terminated trunk assemblies are the perfect solution for Enterprise / Premise & Data Centre applications where speed of installation is important. Factory termination and testing simplify installation, saving time and labour as compared to field terminated installations.

Bespoke configurations in pre-engineered lengths with connectors to meet the specific needs of each application. Assemblies are typically built with a choice of 6 or 12 cable bundle using LSZH jacket. Standards compliant premium connectors and cable are used to ensure the best possible headroom and performance.

    Pre-terminated Bundle Trunk Cable
    AWG
    26
    Termination End
    Plug-Plug;Plug-Jack;Jack-Jack;Jack-Open;Plug-Open
    Cable Type
    Cat8, Cat 7A,Cat 7, Cat 6A , Cat.6 & Cat5E
    Cable Count
    6 cables; 12 cables; 24 cables
    Package
    Premium Carton Box
    Test limited
    Fluke DSX-8000 Channel Link Test
    Key Features:
    1,Up to 75% time saved on site and labor costs.
    2, Factory-terminated and pre-tested cabling to allow simple plug-play installation.
    3, Termination End: Plug-to-Plug; Plug-to-Jack; Jack-to-Jack; Jack-to-Open; Plug-to-Open
    4, Terminated ends offered in either “staggered” or “even” cut.
    5, Cable count: 6 cables; 12 cables; 24 cables; or customized
    6, Available in CAT.8, Cat.7A, Cat.7, Cat.6A, Cat.6 & Cat.5e
    7, Premium packing available 8, Choose from 9 colors.
     Application:
    Pre-Terminated Trunk Cable Assemblies are designed to improve efficiency and reduce labor cost and waste in large infrastructures
    with high-density cross-connection and patching systems. Pre-Terminated Copper Assemblies provide you with a ‘plug and play’ system.
    Product Display
      

    Easy Link Cat6/Cat6a Pre-Terminated Copper Trunk Bundle Cable

    Easy Link Cat6/Cat6a Pre-Terminated Copper Trunk Bundle Cable

    Pre-terminated/Pre-bundled Copper Trunk Cabling Solutions

    • Type: Cat6/Cat6A/Cat7
    • Conductor: Stranded 24/26/28AWG
    • Lengths: 0.2m/0.3m/0.5m/1m/1.5m/2m/3m…30m
    • Colors: Blue/grey/black/green/yellow/red/white…
    • Package: 1pcs/PE bag
    • Approvals: CE, RoHS&REACH
    • Warranty: Lifetime

     

    China  Leading Manufacturer Pre-terminated Bundle Cat.6A S/FTP Trunk Cable

     

    Pre-terminated Bundle Cat.6A S/FTP Trunk Cable
    AWG
    26
    Termination End
    Plug-Plug;Plug-Jack;Jack-Jack;Jack-Open;Plug-Open
    Cable Type
    Cat8, Cat 7A,Cat 7, Cat 6A , Cat.6 & Cat5E
    Cable Count
    6 cables; 12 cables; 24 cables
    Package
    Premium Carton Box
    Test limited
    Fluke DSX-8000 Channel Link Test

    Key Features:
    1,Up to 75% time saved on site and labor costs.
    2, Factory-terminated and pre-tested cabling to allow simple plug-play installation.
    3, Termination End: Plug-to-Plug; Plug-to-Jack; Jack-to-Jack; Jack-to-Open; Plug-to-Open
    4, Terminated ends offered in either “staggered” or “even” cut.
    5, Cable count: 6 cables; 12 cables; 24 cables; or customized
    6, Available in CAT.8, Cat.7A, Cat.7, Cat.6A, Cat.6 & Cat.5e
    7, Premium packing available 8, Choose from 9 colors.
     
    Application: Pre-Terminated Trunk Cable Assemblies are designed to improve efficiency and reduce labor cost and waste in large infrastructures
    with high-density cross-connection and patching systems. Pre-Terminated Copper Assemblies provide you with a ‘plug and play’ system.

    CAT8 Ethernet Network Cable  pass the fluke test 2000MHz 40GB 1M 2M 5M 10M patch cable

    CAT8 Ethernet Network Cable  pass the fluke test 2000MHz 40GB 1M 2M 5M 10M patch cable

     2000MHz  CAT 8  High-Speed 40Gbps Ethernet Patch Cable

    Fluke test pass

    • Type: Cat8
    • Bandwidth: 2000MHz
    • Speed: 40 Gigabit
    • Conductor: Stranded 24/26/28AWG
    • Lengths: 0.2m/0.3m/0.5m/1m/1.5m/2m/3m…30m
    • Colors: Blue/grey/black/green/yellow/red/white…
    • Package: 1pcs/PE bag
    • Approvals: CE, RoHS&REACH
    • Warranty: Lifetime

     

    Easy Link’s latest PIMF cat8 patch cord is designed for 40G 2000MHz dada transmission on copper cabling, which can  pass category 8 channel test at MAX 30 meters. Meets the standards ANSI/TIA-568-C.2-1 . Component with four 28AWG 7/0.12mm stranded bare copper twisted-pair wires(or 26awg and 24awg), insulated with high density PE, each pair twisted and individually shielded with AL foil, and with the second AL foil or braid shielding and Cat 8 RJ45 shielded modular plugs. COMNEN’s Cat 8 patch cable features four individually shielded pairs as well as an overall cable shield to protect the signals from crosstalk and EMI. Works with category8 Ethernet cable and Cat8 keystone jack, we can provide you with full cat8 solutions.

    Physical Characteristics

    • Cable Type – Cat8 FFTP/SFTP
    • Connector Type(s) – RJ45 Male
    • Wiring Scheme – T568A or T568B
    • Temperature Rating – -20°C to +75°C
    • Voltage Rating – 30V

    ———————————————————————————————————————————————

    Conductor (Qty. 4 twisted pair)

    • Conductor Type – 28AWG(7/0.12), Bare Copper
    • Insulation – HDPE
    • Dimeter – 1.10±0.05mm
    • Pair Identification:
    • Pair1=Orange, Orange-White
    • Pair2=Blue, Blue-White
    • Pair3=Green, Green-White
    • Pair4=Brown, Brown-White

    Connector Type (Qty. 2)

    • Connector Type – Shielded 8P8C (RJ45)
    • Gender – Male
    • Connector Material – PC
    • Contact Material – Copper Alloy, Gold Plating – 50µm
    • Hood Material – Molded PVC

    Overall Cable 

    • Jacket – PVC/LSZH/TPE
    • Minimum Average Thickness – 0.60mm
    • Outer Diameter – 6.0 ± 0.15mm

    ———————————————————————————————————————————————

    Electrical Characteristics

    • Conductor DC Resistance – 22.7Ω/100m (maximum)
    • Impedance – 100Ω
    • Capacitance – 5600pf/100m
    • Propagation Delay – 545ns/100m (maximum)
    • Delay Skew – 45ns/100m (maximum)

    ———————————————————————————————————————————————

    Product Application

    • Horizontal networks installation
    • 40Gigabit; 10Gigabit;Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)
    • Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels etc.

    Product Description
    Type
    CAT8 F/FTP Patch Cord
    Data transfer rate
    40Gbps
    Conductor material
    oxygen-free copper
    Transmission frequencies
    2000MHz
    Facing material
    PVC/LSZH
    length
    0.5m~20m/OEM
    Standard
    ANSI/EIA/TIA-568B
    Overall Outside Diameter
    6.0mm
    Shielding
    F/FTP
    Operating temperature
    -20℃/+70℃
    AWG
    28AWG strand wire
    Bending radius
    4 times the cable diameter

    40Gbps Ethernet Cable RJ45 Cat 8 2000MHz S/FTP Cat8 Patch Cable Patch Cord Soft Jacket 0.5M 1M 2M 3M 5M 10M 15M 20M 25M

    40Gbps Ethernet Cable RJ45 Cat 8 2000MHz S/FTP Cat8 Patch Cable Patch Cord Soft Jacket 0.5M 1M 2M 3M 5M 10M 15M 20M 25M

    CAT 8 Ethernet Cable High-Speed 40Gbps SFTP Network Cable RJ45 with Gold Plated Patch Cord

    • Type: Cat8
    • Bandwidth: 2000MHz
    • Speed: 40 Gigabit
    • Conductor: Stranded 24/26/28AWG
    • Lengths: 0.2m/0.3m/0.5m/1m/1.5m/2m/3m…30m
    • Colors: Blue/grey/black/green/yellow/red/white…
    • Package: 1pcs/PE bag
    • Approvals: CE, RoHS&REACH
    • Warranty: Lifetime

    Easy Link’s latest PIMF cat8 patch cord is designed for 40G 2000MHz dada transmission on copper cabling, which can  pass category 8 channel test at MAX 30 meters. Meets the standards ANSI/TIA-568-C.2-1 . Component with four 28AWG 7/0.12mm stranded bare copper twisted-pair wires(or 26awg and 24awg), insulated with high density PE, each pair twisted and individually shielded with AL foil, and with the second AL foil or braid shielding and Cat 8 RJ45 shielded modular plugs. COMNEN’s Cat 8 patch cable features four individually shielded pairs as well as an overall cable shield to protect the signals from crosstalk and EMI. Works with category8 Ethernet cable and Cat8 keystone jack, we can provide you with full cat8 solutions.

    Physical Characteristics

    • Cable Type – Cat8 FFTP/SFTP
    • Connector Type(s) – RJ45 Male
    • Wiring Scheme – T568A or T568B
    • Temperature Rating – -20°C to +75°C
    • Voltage Rating – 30V

    ———————————————————————————————————————————————

    Conductor (Qty. 4 twisted pair)

    • Conductor Type – 28AWG(7/0.12), Bare Copper
    • Insulation – HDPE
    • Dimeter – 1.10±0.05mm
    • Pair Identification:
    • Pair1=Orange, Orange-White
    • Pair2=Blue, Blue-White
    • Pair3=Green, Green-White
    • Pair4=Brown, Brown-White

    Connector Type (Qty. 2)

    • Connector Type – Shielded 8P8C (RJ45)
    • Gender – Male
    • Connector Material – PC
    • Contact Material – Copper Alloy, Gold Plating – 50µm
    • Hood Material – Molded PVC

    Overall Cable 

    • Jacket – PVC/LSZH/TPE
    • Minimum Average Thickness – 0.60mm
    • Outer Diameter – 6.0 ± 0.15mm

    ———————————————————————————————————————————————

    Electrical Characteristics

    • Conductor DC Resistance – 22.7Ω/100m (maximum)
    • Impedance – 100Ω
    • Capacitance – 5600pf/100m
    • Propagation Delay – 545ns/100m (maximum)
    • Delay Skew – 45ns/100m (maximum)

    ———————————————————————————————————————————————

    Product Application

    • Horizontal networks installation
    • 40Gigabit; 10Gigabit;Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)
    • Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels etc.

    Product Description
    Type
    CAT8 F/FTP Patch Cord
    Data transfer rate
    40Gbps
    Conductor material
    oxygen-free copper
    Transmission frequencies
    2000MHz
    Facing material
    PVC/LSZH
    length
    0.5m~20m/OEM
    Standard
    ANSI/EIA/TIA-568B
    Overall Outside Diameter
    6.0mm
    Shielding
    F/FTP
    Operating temperature
    -20℃/+70℃
    AWG
    28AWG strand wire
    Bending radius
    4 times the cable diameter